dmesg - 2012-04-28 12:13
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-686 (Debian 2.6.32-41squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Mar 26 05:20:33 UTC 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007fff8000 (ACPI data)
BIOS-e820: 000000007fff8000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000373fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 10000-16000
RAMDISK: 377a5000 - 37fef87f
Allocated new RAMDISK: 00100000 - 0094a87f
Move RAMDISK from 00000000377a5000 - 0000000037fef87e to 00100000 - 0094a87e
ACPI: RSDP 000fa3a0 00014 (v00 AMI )
ACPI: RSDT 7fff0000 0002C (v01 AMIINT INTEL865 00000010 MSFT 00000097)
ACPI: FACP 7fff0030 00081 (v01 AMIINT INTEL865 00000011 MSFT 00000097)
ACPI: DSDT 7fff0120 037D5 (v01 INTEL I865G 00001000 MSFT 0100000D)
ACPI: FACS 7fff8000 00040
ACPI: APIC 7fff00c0 0005C (v01 AMIINT INTEL865 00000009 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
1163MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 00012000 - 00018e80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 00014c8d2c] TEXT DATA BSS ==> [0001000000 - 00014c8d2c]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [00014c9000 - 00014cf124] BRK ==> [00014c9000 - 00014cf124]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000100000 - 000094a87f] NEW RAMDISK ==> [0000100000 - 000094a87f]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
found SMP MP-table at [c00fc0f0] fc0f0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0007fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fff0
On node 0 totalpages: 524159
free_area_init_node: node 0, pgdat c13b08c0, node_mem_map c14d1200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 2328 pages used for memmap
HighMem zone: 295642 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2800000 s34328 r0 d23016 u2097152
pcpu-alloc: s34328 r0 d23016 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000373fe:0007fff0)
Memory: 2064736k/2097088k available (2506k kernel code, 30780k reserved, 1310k data, 380k init, 1191880k highmem)
virtual kernel memory layout:
fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc13bb000 - 0xc141a000 ( 380 kB)
.data : 0xc1272b17 - 0xc13ba4c4 (1310 kB)
.text : 0xc1000000 - 0xc1272b17 (2506 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 3000.114 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.22 BogoMIPS (lpj=12000456)
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: no PMU driver, software events only.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (12000.78 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: group c280370c cpus 0 (cpu_power = 589) group c2a0370c cpus 1 (cpu_power = 589)
domain 1: span 0-1 level MC
groups: group c2803778 cpus 0-1 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: group c2a0370c cpus 1 (cpu_power = 589) group c280370c cpus 0 (cpu_power = 589)
domain 1: span 0-1 level MC
groups: group c2803778 cpus 0-1 (cpu_power = 1178)
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: Enabling MCH 'Overflow' Device
pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff]
pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
pci 0000:00:1d.0: reg 20 io port: [0xe000-0xe01f]
pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f]
pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
pci 0000:00:1d.3: reg 20 io port: [0xec00-0xec1f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7fffc00-0xf7ffffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.3: reg 20 io port: [0xc00-0xc1f]
pci 0000:00:1f.5: reg 10 io port: [0xdc00-0xdcff]
pci 0000:00:1f.5: reg 14 io port: [0xd800-0xd83f]
pci 0000:00:1f.5: reg 18 32bit mmio: [0xf7fffa00-0xf7fffbff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf7fff900-0xf7fff9ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xf5000000-0xf5ffffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf7de0000-0xf7dfffff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf3d00000-0xf7dfffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xd3c00000-0xf3bfffff]
pci 0000:02:06.0: reg 10 io port: [0xcc00-0xccff]
pci 0000:02:06.0: reg 14 32bit mmio: [0xf7efff00-0xf7efffff]
pci 0000:02:06.0: supports D1 D2
pci 0000:02:06.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:06.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf7e00000-0xf7efffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: ioport range 0x290-0x297 has been reserved
system 00:01: ioport range 0x3f0-0x3f1 has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x400-0x43f has been reserved
system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xf3d00000-0xf7dfffff
pci 0000:00:01.0: PREFETCH window: 0xd3c00000-0xf3bfffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0xc000-0xcfff
pci 0000:00:1e.0: MEM window: 0xf7e00000-0xf7efffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 1 mem: [0xf3d00000-0xf7dfffff]
pci_bus 0000:01: resource 2 pref mem [0xd3c00000-0xf3bfffff]
pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:02: resource 1 mem: [0xf7e00000-0xf7efffff]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 8490k freed
audit: initializing netlink socket (disabled)
type=2000 audit(4076006445.531:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1723
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 865 Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 1999-03-01 00:00:46 UTC (920246446)
Initalizing network drop monitor service
Freeing unused kernel memory: 380k freed
Write protecting the kernel text: 2508k
Write protecting the kernel read-only data: 908k
udev[56]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fffc00
Floppy drive(s): fd0 is 1.44M
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:02:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
libata version 3.00 loaded.
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.28
8139too 0000:02:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
eth0: RealTek RTL8139 at 0xcc00, 00:11:09:d6:e9:ad, IRQ 20
scsi0 : ata_piix
scsi1 : ata_piix
uhci_hcd: USB Universal Host Controller Interface driver
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ata2.00: HPA detected: current 78125040, native 78165360
ata2.00: ATA-5: WDC WD400EB-11CPF0, 06.04G06, max UDMA/100
ata2.00: 78125040 sectors, multi 16: LBA
ata2.00: configured for UDMA/100
ata1.00: ATAPI: TSSTcorp CD-ROM TS-H192C, B504, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM TSSTcorp CD-ROM TS-H192C B504 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA WDC WD400EB-11CP 06.0 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 1:0:0:0: [sda] 78125040 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
usb 4-2: new full speed USB device using uhci_hcd and address 2
PM: Starting manual resume from disk
PM: Resume from partition 8:5
PM: Checking hibernation image.
PM: Error -22 checking image file
PM: Resume from disk failed.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
usb 4-2: New USB device found, idVendor=04b8, idProduct=0101
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: Scanner GT-7000
usb 4-2: Manufacturer: EPSON
usb 4-2: configuration #1 chosen from 1 choice
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
udev[290]: starting version 164
input: PC Speaker as /devices/platform/pcspkr/input/input1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
parport_pc 00:0c: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
processor LNXCPU:01: registered as cooling_device1
intel_rng: FWH not detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ACPI: I/O resource 0000:00:1f.3 [0xc00-0xc1f] conflicts with ACPI region SMOV [0xc00-0xc06]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Error: Driver 'pcspkr' is already registered, aborting...
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x043000a4)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[drm] nouveau 0000:01:00.0: ... BIOS signature not found
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
intel8x0_measure_ac97_clock: measured 54120 usecs (2608 samples)
intel8x0: clocking to 48000
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 05.43.02.27
[drm] nouveau 0000:01:00.0: BIT table 'd' not found
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 4 2
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 04010312 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04010310 00000028
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 0080c083
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xED22
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF0C5
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF4E1
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF669
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF72D
[TTM] Zone kernel: Available graphics memory: 441424 kiB.
[TTM] Zone highmem: Available graphics memory: 1037364 kiB.
[drm] nouveau 0000:01:00.0: 128 MiB VRAM
agpgart-intel 0000:00:00.0: AGP 3.0 bridge
agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode.
agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[drm] nouveau 0000:01:00.0: Saving VGA fonts
[drm] nouveau 0000:01:00.0: Detected a VGA connector
[drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[drm] nouveau 0000:01:00.0: Detected a TV connector
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo f66a5800
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
Console: switching to colour frame buffer device 160x64
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
Adding 1631224k swap on /dev/sda5. Priority:-1 extents:1 across:1631224k
EXT3 FS on sda1, internal journal
loop: module loaded
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
fuse init (API version 7.13)
eth0: no IPv6 routers present
[drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
CPU1: Temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Temperature above threshold, cpu clock throttled (total events = 1)
Disabling lock debugging due to kernel taint
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
Machine check events logged
CPU1: Temperature above threshold, cpu clock throttled (total events = 158)
CPU0: Temperature above threshold, cpu clock throttled (total events = 159)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
Machine check events logged
CPU1: Temperature above threshold, cpu clock throttled (total events = 28584)
CPU0: Temperature above threshold, cpu clock throttled (total events = 28587)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
Machine check events logged
CPU0: Temperature above threshold, cpu clock throttled (total events = 45095)
CPU1: Temperature above threshold, cpu clock throttled (total events = 45097)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
Machine check events logged
CPU0: Temperature above threshold, cpu clock throttled (total events = 69012)
CPU1: Temperature above threshold, cpu clock throttled (total events = 69017)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
Machine check events logged
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
CPU0: Temperature above threshold, cpu clock throttled (total events = 69896)
CPU1: Temperature above threshold, cpu clock throttled (total events = 69899)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
Machine check events logged
CPU0: Temperature above threshold, cpu clock throttled (total events = 71779)
CPU1: Temperature above threshold, cpu clock throttled (total events = 71783)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
Machine check events logged
[drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
CPU0: Temperature above threshold, cpu clock throttled (total events = 76749)
CPU1: Temperature above threshold, cpu clock throttled (total events = 76752)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
Machine check events logged
CPU1: Temperature above threshold, cpu clock throttled (total events = 79296)
CPU0: Temperature above threshold, cpu clock throttled (total events = 79293)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 82818)
CPU1: Temperature above threshold, cpu clock throttled (total events = 82821)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 85933)
CPU1: Temperature above threshold, cpu clock throttled (total events = 85936)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU1: Temperature above threshold, cpu clock throttled (total events = 88123)
CPU0: Temperature above threshold, cpu clock throttled (total events = 88120)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 92495)
CPU1: Temperature above threshold, cpu clock throttled (total events = 92498)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 96351)
CPU1: Temperature above threshold, cpu clock throttled (total events = 96354)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU1: Temperature above threshold, cpu clock throttled (total events = 99735)
CPU0: Temperature above threshold, cpu clock throttled (total events = 99732)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU1: Temperature above threshold, cpu clock throttled (total events = 103969)
CPU0: Temperature above threshold, cpu clock throttled (total events = 103966)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 110362)
CPU1: Temperature above threshold, cpu clock throttled (total events = 110366)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 116653)
CPU1: Temperature above threshold, cpu clock throttled (total events = 116658)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 123608)
CPU1: Temperature above threshold, cpu clock throttled (total events = 123613)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 126347)
CPU1: Temperature above threshold, cpu clock throttled (total events = 126352)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 137441)
CPU1: Temperature above threshold, cpu clock throttled (total events = 137447)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU1: Temperature above threshold, cpu clock throttled (total events = 152897)
CPU0: Temperature above threshold, cpu clock throttled (total events = 152885)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 168944)
CPU1: Temperature above threshold, cpu clock throttled (total events = 168961)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU1: Temperature above threshold, cpu clock throttled (total events = 183527)
CPU0: Temperature above threshold, cpu clock throttled (total events = 183507)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 195490)
CPU1: Temperature above threshold, cpu clock throttled (total events = 195510)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU1: Temperature above threshold, cpu clock throttled (total events = 209034)
CPU0: Temperature above threshold, cpu clock throttled (total events = 209015)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU1: Temperature above threshold, cpu clock throttled (total events = 222895)
CPU0: Temperature above threshold, cpu clock throttled (total events = 222874)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU1: Temperature above threshold, cpu clock throttled (total events = 237183)
CPU0: Temperature above threshold, cpu clock throttled (total events = 237161)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU1: Temperature above threshold, cpu clock throttled (total events = 252132)
CPU0: Temperature above threshold, cpu clock throttled (total events = 252107)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 280544)
CPU1: Temperature above threshold, cpu clock throttled (total events = 280562)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU1: Temperature above threshold, cpu clock throttled (total events = 297716)
CPU0: Temperature above threshold, cpu clock throttled (total events = 297698)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 314381)
CPU1: Temperature above threshold, cpu clock throttled (total events = 314398)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU1: Temperature above threshold, cpu clock throttled (total events = 351488)
CPU0: Temperature above threshold, cpu clock throttled (total events = 351470)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 359847)
CPU1: Temperature above threshold, cpu clock throttled (total events = 359864)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 363478)
CPU1: Temperature above threshold, cpu clock throttled (total events = 363496)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 366705)
CPU1: Temperature above threshold, cpu clock throttled (total events = 366722)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU1: Temperature above threshold, cpu clock throttled (total events = 368567)
CPU0: Temperature above threshold, cpu clock throttled (total events = 368551)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU1: Temperature above threshold, cpu clock throttled (total events = 368682)
CPU0: Temperature above threshold, cpu clock throttled (total events = 368666)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 370900)
CPU1: Temperature above threshold, cpu clock throttled (total events = 370914)
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
CPU1: Temperature above threshold, cpu clock throttled (total events = 372168)
CPU0: Temperature above threshold, cpu clock throttled (total events = 372153)
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal